Integrated Surface DTH Drilling Rig

Integrated Surface DTH Drilling Rig

Model: RCZ453T integrated surface DTH drilling rig
Drilling depth: 28m
Drilling diameter: 90-130mm
Engine: 228KW Yuchai engine
Price: $95000-96000. The cost of a drilling rig depends on its specific configuration.
Send Inquiry
Chat Now
Description
Technical Parameters

Products Description

 

The RCZ453T is an integrated surface DTH drilling rig designed for quarry and mining operations. It combines drilling, air compression, and mobility into a single unit, making it a practical alternative to traditional split-type drilling rigs.

 

Contractors using the RCZ453T benefit from faster setup and higher mobility. Its crawler undercarriage, with 10° oscillation and high ground clearance, makes relocation across rugged quarry floors simple and safe. Once in position, operators can drill straight blast holes up to 28 meters deep with a 4-inch DTH hammer, supported by a reliable air supply of 18 m³/min at 22 bar.

 

Field reports show that penetration rates are up to 20% higher than older rigs, thanks to the powerful 2,800 Nm rotary head and automated feed control. Beyond blast hole drilling, the rig also handles pre-split and slope stabilization holes, helping reduce overbreak and improve safety at the quarry face.

 

Daily operation requires only a single operator inside a climate-controlled, FOPS/ROPS-certified cabin. Maintenance is simplified with labeled service points and spring-assisted access doors, minimizing downtime even in demanding environments.

 

For quarry managers, the RCZ453T is more than just a drill-it is a tool to cut operating costs, improve productivity, and achieve more consistent blasting results across their sites.

 

Common Drilling Challenges & Solutions

 

Surface drilling in quarries often faces issues such as low efficiency, difficult relocation, and inconsistent hole accuracy.

 

RCZ453T Solutions:

✔ Integrated design replaces split rigs, reducing setup time

✔ High torque (2800 Nm) improves penetration in hard rock

✔ Crawler chassis allows easy movement across rough terrain

✔ Automated feed control ensures stable and accurate drilling

 

DTH drilling rig

 

Products Specification

 

RCZ453T

Boom & Feed

Hole depth.Max

28 m

Feed type

Hydraulic motor+Chain

Hole range

90-130 mm

Feed length

7475 mm

Drill pipe handling capacity

6+1

Feed extension

1200 mm

Drill pipe diameter

76/68 mm

Feed travel length

4585 mm

Drill pipe length

4000 mm

Feed force Max

18 Kn

DTH hammer

4''/3.5''

Feed rate Max

0.85 m/s

Rotation torgue

2800 Nm

Pull up force Max

24.8 Kn

Rotation rpm

0-110 rpm

   

Fule tank capacity

480 L

   

Diesel Engine

Screw Compressor

Manufacturer

Yuchai

Manufacturer

ZEGA

Model

YC6L310-H300

Model

ZGDA 160

Emission standards

China III

Air working pressure

22 bar

Rated power

228kW

Air flow FAD

18 m3/min

Chassis

Weight & Dimensions

Tramming speed Max

3 km/h

Length

9000 mm

Max Gradeability

25°

Width

2360 mm

Carrier ground clearance

450 mm

Height

3000 mm

Track frame oscillation angel

±10°

Weight

15000 kg

Traction forece.Max

115.4 kN

   

 

Integrated Surface DTH Drilling Rig 3

 

Products Advantages

 

1. Compact and Mobile Design
Designed with a fully integrated chassis, the RCZ453T moves easily across uneven quarry floors. Its heavy-duty oscillating tracks and 450 mm ground clearance allow operators to position the rig precisely, reducing setup time and increasing daily drilling productivity compared to conventional split rigs.

 

2. Powerful and Precise Drilling
Equipped with a 228 kW Yuchai engine and a ZEGA dual-stage compressor, the rig provides stable air pressure for 4-inch DTH hammer operation. With up to 2,800 Nm of rotary torque, operators can drill straight blast holes up to 28 meters deep, achieving faster penetration in medium-hard rocks while maintaining accuracy for optimal blast patterns.

 

3. Automatic Control for Efficiency
The hydraulic system automatically regulates feed pressure and drilling angle, making vertical, inclined, and slope drilling simpler and more consistent. This automation minimizes operator errors, reduces material waste, and ensures reliable performance even in challenging rock formations.

 

4. Durable and Easy to Maintain
Key components, including the reinforced box-type feed beam and wear-resistant chains, are engineered for long service life under harsh mining conditions. Spring-assisted access doors and clearly labeled maintenance points allow quick inspections and routine servicing, helping to reduce downtime.

 

5. Safe and Comfortable Operation
The FOPS/ROPS-certified, climate-controlled cab protects falling objects, rollovers, and excessive noise. Single-operator controls reduce manpower requirements while maintaining complete control over drilling operations, ensuring safety and comfort throughout long working hours.

 

6. Environmentally Considerate
A dual-stage dust collection system and Tier 3 compliant engine minimize emissions and dust, helping operations meet environmental standards while maintaining efficient drilling performance.

 

7. Optimized for Quarry Productivity
By combining mobility, precision, and automated controls, the RCZ453T enhances overall site efficiency. It supports blast hole drilling, pre-splitting, and slope stabilization tasks, helping reduce overbreak and improve material recovery-turning the rig into a cost-effective solution for modern quarry operations.

 

DTH drill rig

 

Application

 

The RCZ453T Integrated Surface DTH Drilling Rig provides stable and reliable performance across various surface drilling operations. It is designed for quarry and mining sites, suitable for blast hole drilling in rock formations to support material extraction. The rig is also capable of pre-splitting hole drilling to create controlled fractures, helping maintain slope stability and reduce overbreak. It supports buffer hole and slope pressure relief hole drilling, contributing to slope stabilization and preventing rockfall. With a maximum drilling depth of 28 meters, the RCZ453T meets the needs of deep-hole drilling applications.

 

surface drill rig

 

 

Hot Tags: integrated surface dth drilling rig, China integrated surface dth drilling rig manufacturers, suppliers, factory, Ground Anchor Drilling Rig, Hydraulic DTH Drilling Machine, Automatic DTH Drilling Rig, Blast Hole Drilling Machine In Mining, Down The Hole Drill Rig, Surface Mining Machine For Blast hole In Quarry