Product Description
The RC195Y is a compact piling machine designed for use in solar power plant construction. It is equipped with an 84-kilowatt turbocharged engine that delivers reliable power and efficient operation. The hydraulic system features components from trusted international brands, including a PIMCO oil pump from the U.S. and a Hydrocontrol valve group from Italy, ensuring stable performance and simplified maintenance. A dual-motor drive system is used for the power head, increasing output torque and drilling force. This design improves piling efficiency and helps reduce long-term operating and maintenance costs.
The machine's chassis is based on excavator engineering, providing strong load-bearing capacity and adaptability to uneven or complex ground conditions. Its compact frame and telescopic mast allow for accurate positioning and controlled drilling in limited spaces. The RC195Y offers a practical and efficient solution for solar foundation piling tasks in both flat and challenging terrain.
Product Specifications
|
Bore diameter(DTH hammer)(mm) |
90-300 |
|
Bore depth(m) |
20-100 |
|
Air consumption(m³/min) |
10-26 |
|
Air pressure(Mpa) |
0.7-1.6(medium) |
|
1.6-2.46(high) |
|
|
Pile diameter(mm) |
76/89 |
|
For rock(F) |
6-20 |
|
Bore diameter(screw)(mm) |
Max 400 |
|
Bore depth(m) |
0-30m |
|
Screw pile diameter(mm) |
130-400 |
|
Once promotion(mm) |
2000 |
|
Skid pitch(º) |
100 |
|
swinging angle of the skid(º) |
left and right total 40 |
|
boom swing angle(º) |
left and right total 50 |
|
Rotation speed(r/min) |
0-110 |
|
Climb ability(º) |
45 |
|
Dimension(L*W*H)(mm) |
5330*2110*2850 |
|
Weight(kg) |
7300 |
|
Walk speed(km/h) |
0-2.5 |
All-in-One Equipment for Photovoltaic and Construction Foundation Work
1. Ground-Mounted PV Projects: Flexible Mobility and Steady Productivity
The RC195Y small piling machine is designed for open-field photovoltaic construction where frequent relocation is required.
Its compact structure and reinforced crawler chassis provide reliable movement across deserts, Gobi areas, and uneven mountain terrain.
With a drilling diameter range of 130–400 mm, the machine maintains fast and consistent piling speed, helping contractors shorten project cycles and support earlier grid connection.
2. Challenging Geology: One Machine for Multiple Conditions
For layers containing pebbles or medium-weathered rock, the RC195Y small piling machine integrates a built-in DTH hammer to handle hard formations without bringing in additional rock-breaking equipment.
The combination of high-pressure air output and spiral drilling improves penetration efficiency and helps reduce the total cost of equipment deployment and onsite coordination.
3. PV + Construction Projects: Multi-Function Capability
When photovoltaic installation is combined with structural foundation work, managing different machines can increase complexity.
The RC195Y brings DTH drilling and spiral drilling into a single platform, supporting 90–400 mm drilling diameters and depths up to 100 meters.
It enables fewer machines onsite and simplifies scheduling, making it suitable for mixed PV-and-building foundation projects.
4. Distributed PV Scenarios: Compact Size, Precise Positioning
In confined areas such as rural rooftops, factory yards, or commercial installations, the RC195Y's small footprint is an advantage.
The mast offers wide-angle swing capability for accurate positioning, and the crawler chassis applies low ground pressure to minimize surface disturbance.
A touchscreen control system provides straightforward operation, allowing new operators to become familiar with the machine in a short time.
Application
The RC195Y small piling machine is equipped with an advanced hydraulic system that allows for efficient hole-to-hole movement and flexible adjustments during operation. Its compact design, combined with a mast compensation system, ensures stable drilling by enabling the mast to remain in firm contact with the ground throughout the process.
The hydraulic controls can be adjusted to suit varying soil conditions, ensuring appropriate impact force is delivered based on the specific ground requirements. This piling machine is commonly used in photovoltaic solar power projects, highway guardrail installation, and other infrastructure applications.
Packaging & Shipping
Delivery time: 10-15days
We use professional equipment to frame the boxes. We will arrange specially-assigned person to inspect every step. Ensure transportation safety.
Certificate
Our products have passed CE certification and ISO9001 quality management system certification, ensuring that they meet international standards in terms of safety, reliability and quality.
Hot Tags: small piling machine, China small piling machine manufacturers, suppliers, factory, Mini Piling Rig, Micro Pile Machine, Compact Hydraulic Mini Solar Pile Driver Machine, Hydraulic Piling Machine, Pile Drilling Rig, Mini Crawler Guardrail Pile Driver with Hydraulic Hammer
