Product Description
The RCKS-15 Automatic DTH Drilling Rig is designed for mining and construction projects that require high efficiency, safety, and reliable performance in demanding environments. Powered by a Cummins Tier 3 diesel engine with a dual-end output system, it delivers consistent power for heavy-duty applications such as open-pit and stone mining. The automated drill pipe handling system and integrated lubrication module enable single-person operation, reducing labor costs and minimizing errors. With an intuitive control system, operators can easily adjust drilling angles and depths for precise results, while the intelligent anti-jamming function ensures uninterrupted drilling. A high-efficiency dust removal system combined with an insulated, air-conditioned cab provides a safer and more comfortable working environment. Capable of drilling up to 35 meters without additional equipment, the rig simplifies deep drilling operations. Its reinforced structure and durable materials reduce maintenance requirements and extend service life.
Product Features
- Cummins Tier 3 diesel engine delivers reliable power for demanding operations
- Automated drill pipe handling and lubrication system support single-person operation
- Simple and intuitive control system ensures accurate drilling alignment
- Intelligent anti-jamming system reduces downtime and keeps drilling continuous
- High-efficiency dust removal and air-conditioned cab improve operator safety and comfort
- Maximum drilling depth of 35 meters meets deep-hole requirements without extra equipment
- Reinforced structure and durable materials minimize maintenance costs and extend lifespan
Product Specifications
|
Model No |
RCKS-15 automatic DTH drilling rig |
|
Rock hardness |
f=6-20 |
|
Hole diameter |
135-190mm |
|
Economic Drill depth |
35m |
|
Walking speed |
3.0km/h |
|
Grade ability |
25° |
|
Ground clearance |
430mm |
|
Diesel motor |
QSZ13-C400 |
|
Machine Power |
Cummins 298KW,2200r/min |
|
Screw compressor air delivery |
22m³/min |
|
Exhaust pressure |
25bar |
|
System working pressure |
20bar |
|
Overall Dimension(L*W*H) |
11500x2716x3540(mm) |
|
Weight |
23000kgs |
|
Rotating speed |
0-118r/min |
|
Rotation torque |
4100N·m |
|
Lifting Power |
65000N |
|
Push type |
Motor-Chain |
|
Push length(mm) |
5000mm |
|
Carriage pitch angle |
125° |
|
Carriage swing angle |
Right 97° left 33° |
|
Drill arm swing angle |
Right 42° left 15° |
|
The leveling Angle frame |
Up 10° down 10° |
|
Compensation length(mm) |
1800mm |
|
Drill hammer |
HD55A |
|
Drill pipe |
φ89×5000/φ102×5000 |
|
Connect stem implement ability |
6+1 |
|
Catching dust way |
Dry(hydraulic drive whirlwind laver streaming) |
|
Connect drilling rod |
Automatically connecting and discharging |
|
Since artery card way |
Electro-hydraulic vacancy prevent card |
|
Pipe lubrication method |
Automatic spray oil lubrication |
|
Drill pipe thread protection |
Equipped with floating street protection pipe thread |
|
Drill hole angle indicator |
Two-dimension electron angle indicator |
|
Drill hole depth indicator |
Drill angle and Electron hole depth indicator |
Why Choose the RCKS-15 Automatic DTH Drilling Rig?
Energy Efficiency
- Power Matching: Cummins Tier 3 engine with smart load response reduces fuel use by up to 20%.
- Hydraulic System: Load-sensing pump cuts idle energy loss by 30%, saving 12–15L of fuel per 8-hour shift.
- Energy Recovery: Regenerative system lowers engine load and cuts cycle energy use by 8%.
Environmental Protection
- Emissions Control: Three-stage treatment system meets China IV and EU Stage V standards.
- Low Noise: Sound insulation and quiet hydraulics keep noise below 82dB.
- Dust Suppression: 99.6% dust capture rate, with reusable rock powder.
- Recyclable Materials: 80% of structural parts are recyclable, with a 75% recovery rate.
Application
RCKS-15 automatic DTH drilling rig is an efficient drilling equipment that is widely used in bridge construction, mining, rock drilling and other projects. Its working principle is to infiltrate the impactor into the borehole, reduce the energy loss caused by the impact energy transmitted by the drill rod, and reduce the impact of hole depth on drilling efficiency. This design can significantly increase drilling speed and operating efficiency, and is especially suitable for hard rock formations and projects requiring deep hole drilling.
About Transportation
Delivery time: 10-15days
We use professional equipment to frame the boxes. We will arrange specially-assigned person to inspect every step. Ensure transportation safety.
certificate
FAQ
Q: Are you the original manufacturer?
A: Yes, we are an official leading manufacturer of construction machinery in China and offer a full range of products to meet your needs.
Q: What payment terms can be accepted?
A: We typically work with T/T (Telegraphic Transfer) or L/C (Letter of Credit) payment terms.
Q: Which Incoterms 2010 can we work with?
A: We typically work with FOB (Free on Board), CFR (Cost and Freight), and CIF (Cost, Insurance, and Freight).
Q: What is the delivery time?
A: The delivery time is typically 7-15 days after receiving the deposit.
Q: What is the warranty period?
A: The warranty is 12 months from the date of shipment.
Q: What is the Minimum Order Quantity (MOQ)?
A: The MOQ is 1 piece.
Hot Tags: automatic dth drilling rig, China automatic dth drilling rig manufacturers, suppliers, factory, Hydraulic Drilling Rig Machine, Down The Hole Drill Rig, Rock Blasting Drilling Rig, Top Drive Drilling Rig, Drilling Machine Rock, Hydraulic Drilling Machine
